The state of the art of two-color focal plane arrays (FPAs)
are two or three terminal photo detector pixels integrated with electronic
readout circuits (ROICs). However, a multicolor (> 2) photodetector pixel
requires many more terminals, making it very difficult, if not impossible, to
integrate multicolor pixel arrays to ROICs due to the increase in contact number
and the real estate for their traces. An innovative approach has been used to
connect two different wavelength photo detectors with opposite polarity in
series to enable a two-color FPA. Changing the bias voltage selects which of the
two diodes operates in conductive mode. However, this approach is limited for
multicolor photodetectors and FPAs.
Researchers at Arizona State University have created a novel
approach that enables two-terminal multi-junction photo detectors and focal
plane arrays for multi-color (>2) detection. The idea behind this invention
is to connect multiple photodiodes with different band gaps (or cutoff
wavelengths) in series, and with the same polarization. Light sources such as
LEDs can optically bias all photodiodes except the detecting photodiode, which
operates under reverse bias in photoconductive mode. Using this approach, it is
possible to operate the device as one single-color detector, with a spectral
response determined by the detecting photodiode.
Potential Applications
- Multicolor imaging and sensing applications, including
- Environmental sensing
- Infrared surveillance
- High-resolution and high-sensitivity imaging
(hyperspectral imaging)
- Chemiluminescence
- Astronomy
- Wave front sensing
Benefits and Advantages
- Two-terminal design - Multicolor detectors don not
require additional space-consuming connections.
- Unlimited number of detecting colors – very broad
spectral detection range possible
Download original PDF
